by on February 26, 2026
4 views


Performing a complete fluid check on your car is one of the simplest yet most important maintenance tasks you can do

Start by parking your car on a level surface and turning off the engine

Allow the engine to cool for 5–10 minutes to ensure accurate fluid readings

Find each fluid container and dipstick under the hood—consult your manual if unsure

Begin with the engine oil level

Pull out the dipstick, wipe it clean with a rag, reinsert it fully, then pull it out again

Look at the level between the minimum and maximum marks

The oil should also look clear and amber, not dark or gritty

If the level is below minimum, refill using the viscosity and specification listed in your manual

Move on to evaluating your engine coolant

Refer to the plastic overflow container, not the metal radiator cap, unless the engine has been off for over 30 minutes

The coolant must sit between the "MIN" and "MAX" indicators for both temperature states

Never remove the radiator cap while the engine is warm or running

Add only the manufacturer-recommended coolant type mixed with water in the correct ratio

Now check the brake fluid

Find the small plastic container mounted close to the master cylinder on the left side

It should appear clean and colorless—not cloudy or browned

A low brake fluid level may signal a leak, failing caliper, or worn brake components—get it checked immediately

For automatic transmission fluid, start the engine and let it idle in park

Wipe the stick clean, reinsert it completely, then pull it out again to assess both position and appearance

Healthy transmission fluid is bright red or pink with no acrid odor

If the fluid is black or smells like burning plastic, a fluid and filter change is overdue

Don’t forget the power steering reservoir if your car is equipped with it

max lines or اتوسرویس داوود a dipstick

Top off if needed with the correct fluid

Don’t overlook the windshield washer fluid

This requires no tools—just open the cap and pour in fluid when needed

Use winter-grade fluid in freezing temps and standard fluid in warmer months

Once done, snap all caps and dipsticks back into place tightly

Maintain a simple log of each inspection and the fluids you replenished

Making this a monthly habit reduces the risk of sudden failures and keeps your car running for years
Be the first person to like this.